NUMISMATIC
TERMINOLOGY (In
Alphabetic Order)
The glossary will help you understand terms
and acronyms commonly used in the field of coin collecting.
• Abrasions- Light rubbing or scuffing from friction, not to be
confused with hairlines or bag marks.
• Alloy- A combination of two or more metals.
• Annealing- The heating and cooling process by which planchets are
softened to allow the metal to flow more smoothly during the strike.
• Bag mark - A surface mark, usually in the
form of a nick, acquired by a coin when it came into contact with others in a
mint bag. Bag marks are most common on large and heavy silver and gold coins.
• Blemishes- Minor nicks, marks, flaws, or spots of discoloration that
mar the surface of a coin.
• Bronze- An alloy of copper, zinc, and tin.
• Bullion- Uncoined gold or silver in the form of ingots or plate.
• Business strike- A coin intended for circulation in the channels of
commerce (in contrast to a proof coin specifically struck for collectors).
• Cleaning- Refers to removing dirt or
otherwise altering the appearance of a coin through the use of abrasive
materials that mar or scratch the surface in a detectable fashion.
• Commemorative- A coin issued to mark a special event or to honor an
outstanding person.
• DDO/DDR - Doubled Die Obverse, an obverse
die which exhibits doubled images in one or more places but in DDRa reverse die
which exhibits doubled images in one or more places. .
• Denticles or dentils - The tooth like raised design around the rims
of some coins. They are part of the die design.
• Designer- The artist who creates a coin's principal devices.
• Details- Small features and fine lines in a coin design. Particularly
those seen in hair, leaves, wreaths and feathers.
• Die- A metal object used to impress a design into a planchet. Dies
are usually engraved incuse, so that the devices and inscriptions they produce
will be in relief.
• Dipping- The act of removing tarnish, surface dirt, or changing the
coloration of a coin by applying chemicals, or otherwise artificially treating
it with liquids.
• Disme- The early spelling of the word "dime," one tenth of
a dollar.
• Double eagle - A United States twenty dollar gold coin.
• Eagle- A United States ten dollar gold
coin.
• Edge- The area which borders a coin's surface. Also referred to as
coin's "third side." Edges of United States coins may be Reeded,
lettered or plain.
• Electrotype- A counterfeit coin made by the electroplating process.
• Engraver- A person who cuts a design into a coinage die.
• Fineness- Purity of gold or silver,
normally expressed in the terms of one thousand parts.
•Grade- The condition or amount of wear
that a coin has received. Generally, the less wear a given coin has received,
the more valuable it is. Coins are graded on the A.N.A. numerical system from
About Good-3 to Perfect Uncirculated-70.
• Hairlines- A series of minute lines or
scratches, usually visible in the field of a coin, sometimes caused by cleaning
or polishing.
• Half eagle - A United States five dollar gold coin.
• Hub or hob - A metal object with the intended coin design in relief
on one end as it would appear on the finished coin. It is used to produce dies.
• Incuse- The design of a coin which has been
impressed below the coin's surface. When the design is raised above the coin's
surface, it is said to be in relief.
•"Key date"- Slang usually
indicating the rarest (and therefore most expensive)date-and-mint of a
particular coin series.
• Legend - The principal inscription on a
coin.
• lg.- Abbreviation for the word "large,"generally referring
to a date or mintmark.
• Luster- The glossy appearance of the surface of a coin. Although
normally brilliant, with time luster may become dull, frosty, spotted or discolored.
• Milled edge - A raised rim around the outer
surface of a coin. Not to be confused with the Reeded or serrated narrow edge
of the coin.
• Mintmark- A symbol, usually a small letter, used to indicate at which
mint a particular coin was struck.
• Modification- A minor alteration in the basic design of a coin.
• Motto- A word or phrase on a coin.
• Mule- A coin struck from obverse and reverse dies not originally
intended to be used together.
• Numismatics- Area of study relating to
coins, medals, or similar items.
• Numismatist- A student or collector of coins, medals, or similar
items.
• Obverse- The front or fact side of a
coin, usually the side with the date or the principal design. Opposite of the
reverse side.
• Overdate- The date made by superimposing one or more different
numbers on a previously dated die.
• Oxidation- The formulation of oxides or tarnish on the surface of a
coin from exposure to air, dampness, industrial fumes, or other elements.
• Pattern- A prototype of a proposed coin
design.
• Patina - A green or brown surface film found on ancient copper and
bronze coins caused by oxidation over a long period of time.
• Planchet- Disk on which a design is impressed to make a coin, metal
or token.
• Proof - Coins struck for collectors and using specially polished or
otherwise prepared dies.
• Proof like - Used to describe any uncirculated coin with a mirror
like reflective surface but lacking the full characteristics of a proof.
• Quarter eagle - A United States two and one
half dollar gold coin.
• Reeded edge - The edge of a coin with
grooved lines that run vertically around its perimeter. This type of edge is
found on all current United States coins above the five cent denomination.
• Relief - Any part of a coin's design that is raised above the coin's
surface. When the design has been impressed below the coin's surface, it is
said to be incuse.
• Restrike -A coin struck from genuine dies at a date later than its
original issue.
• Reverse- The side of a coin carrying the design of lesser importance.
Opposite of the obverse side.
• Rim- The raised portion of a coin encircling the obverse and reverse
which protects the designs of the coin from wear.
• Scratch- A deep line or groove in a coin
caused by contact with a sharp or rough object.
• sm. - Abbreviation for the word "small," generally
referring to a date or mintmark.
• Striations - Thin, light raised lines on the surface of a coin,
caused by excessive polishing of the die.
• Striking - Refers to the process by which a coin is minted. Also
refers to the sharpness of design details. A sharp strike or strong strike is
one with all of the details struck very sharply; a weak strike has the details
lightly impressed at the time of coining.
• Toning - Natural patination or
discoloration of a coin's surface caused by the atmosphere over a long period
of time. Toning is often very attractive, and many collectors prefer coins with
this feature.
• Truncation - The sharply cut off bottom edge of a portrait.
• Type - A coin's basic distinguishing design.
• Unique - An item of which only one
specimen is known to exist.
• Variety - A minor change from the basic
type design of a coin.
• Weak strike - A coin with certain areas of
its details (in the areas of high relief) not fully formed because of the
hardness of alloy, insufficient striking pressure or improper die spacing.
• Wear - The abrasion of metal from a coin's surface caused by normal
handling or circulation.
• Whizzing - The artificial treatment of a coin by wire brushing, acid
dipping, or otherwise removing metal from the coin's surface to give it the
artificial appearance of being in a higher grade. Whizzing is an alteration,
not a grade or condition.